Differential Seals - LH: Removal
WARNING: This page is about a different car, the 2011 Lincoln MKZ and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage.
- Remove the LH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS article.
- Using a suitable awl, poke a small hole in the seal.
- Using a suitable dent puller, remove the LH differential fluid seal.
NOTE:
Be careful not to damage the case while removing the seal.