EVAP Canister Purge Check Valve: Notes
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
The EVAP canister purge check valve is used on turbocharged engines to prevent boost pressure from forcing open the EVAP canister purge valve and entering the EVAP system. The valve is open under normal engine vacuum. The valve closes during boost conditions to prevent the fuel tank from being pressurized and hydrocarbons forced out of the EVAP system into the atmosphere through the EVAP canister vent solenoid. When the engine is OFF, or at atmospheric pressure, the EVAP canister purge check valve is in an indeterminate state. The EVAP canister purge check valve is an integral part of the purge valve assembly.