LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Rear Suspension) >> Removal And Installation >> Wheel Bearing, Hub, Knuckle, Upper Arm and Lower Arm - Rear >> Item 1: Axle Nut Removal Note

Item 1: Axle Nut Removal Note

WARNING: This page is about a different car, the 2004 Lincoln LS and 2003 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not use a hammer to separate the outboard CV joint from the hub. Damage to the threads and internal CV joint components can result.
    Fig 1: Separating Axle Shaft From Wheel Hub
    G00374128Courtesy of FORD MOTOR CO.
  1. Using the special tools, press the outboard CV joint until it is loose from the hub.