LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC U0412: Invalid Data Received From BECM A

DTC U0412: Invalid Data Received From BECM A

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
U0412 - INVALID DATA RECEIVED FROM BECM A

Description:  The transmission control module (TCM) continuously monitors the controller area network (CAN) for messages from the battery energy control module (BECM). This DTC is set when the message received from the BECM is out of expected range or contains invalid data.
Possible Causes: 
  • CAN circuit
Diagnostic Aids:  Network DTC concerns occur during module-to-module communication. Refer to the MODULE COMMUNICATIONS NETWORK -- FUSION, MILAN & MKZ , Communication Network DTC Chart to continue diagnosis.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC in table
scientia non olet · About LEMON Manuals