LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC U0155: Lost Communication With Instrument Panel Cluster (IPC) Control Module

DTC U0155: Lost Communication With Instrument Panel Cluster (IPC) Control Module

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
U0155 - LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IPC) CONTROL MODULE

Description:  The powertrain control module (PCM) continuously monitors controller area network (CAN) for messages from IPC. This DTC sets when the PCM does not receive the IPC message within the defined amount of time.
Possible Causes: 
  • CAN circuit
Diagnostic Aids:  Network DTC concerns occur during module-to-module communication. Refer to the MODULE COMMUNICATIONS NETWORK -- FUSION, MILAN & MKZ to diagnose the instrument panel cluster (IPC) does not respond to the scan tool symptom.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC in table