LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P2806: (TCM) - Transmission Range Sensor Alignment

DTC P2806: (TCM) - Transmission Range Sensor Alignment

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P2806 (TCM) - TRANSMISSION RANGE SENSOR ALIGNMENT

Description:  The transaxle control module (TCM) monitors vehicle speed and gear position. This DTC indicates that vehicle speed exceeded the maximum calibrated speed in PARK.
Possible Causes: 
  • Damaged park pawl
  • Damaged gear selector assembly/cable
Diagnostic Aids:   
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST TQ .