LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P2803: Transmission Range Sensor B Circuit High

DTC P2803: Transmission Range Sensor B Circuit High

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P2803 - TRANSMISSION RANGE SENSOR B CIRCUIT HIGH

Description:  The powertrain control module (PCM) checks the gear selector position by monitoring two independent voltage signals from the transmission range (TR) sensor. The TR voltages are then compared to an allowed voltage range for each gear. The test fails when the compared voltages are out of range. This DTC indicates that one TR signal is high.
Possible Causes: 
  • TR circuit shorted to voltage or VREF
  • Damaged TR sensor
Diagnostic Aids:  Monitor the TR_A1, TR_A2, and TR_A3 sensor voltage PIDs. The TR_A1 sensor voltage has a negative slope, and TR_A2 sensor voltages has a positive slope.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST TA .
scientia non olet · About LEMON Manuals