LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P1299: Cylinder Head Over Temperature Protection Active

DTC P1299: Cylinder Head Over Temperature Protection Active

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P1299 - CYLINDER HEAD OVER TEMPERATURE PROTECTION ACTIVE

Description:  Indicates an engine overheat condition was detected by the cylinder head temperature (CHT) sensor. An failure mode effect management (FMEM) strategy called fail-safe cooling was activated to cool the engine.
Possible Causes: 
  • Engine cooling system concerns
  • Low engine coolant level
  • Base engine concerns
Diagnostic Aids:  Refer to POWERTRAIN CONTROL SOFTWARE , for more information on the fail-safe cooling strategy and the CHT sensor.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST DL .