LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P1145: (Pcm) - Calculated Torque Error

DTC P1145: (Pcm) - Calculated Torque Error

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P1145 (PCM) - CALCULATED TORQUE ERROR

Description:  This DTC indicates the engine was overproducing torque and overcharging the traction battery, when its operating temperature was below the calibrated threshold. To protect the traction battery the powertrain control module (PCM) disabled the fuel injectors.
Possible Causes: 
  • Intake air system leak
Diagnostic Aids:  This DTC is informational only. Check for any unmetered air leaks. Diagnose any intake air system related DTCs.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC in table
scientia non olet · About LEMON Manuals