LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P0A92: Hybrid Generator Performance

DTC P0A92: Hybrid Generator Performance

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P0A92 - HYBRID GENERATOR PERFORMANCE

Description:  This DTC indicates a generator concern.
Possible Causes: 
  • Generator resolver
  • Generator resolver/current sensor voltage supply
  • Generator current feedback concern
  • Damaged or seized engine
Diagnostic Aids:  Clear the transaxle control module (TCM) continuous DTCs. Carry out a TCM key ON, engine OFF (KOEO) on demand self-test. If DTC P0A92 is present again, check for damaged or seized engine, and install a new transaxle. Refer to the appropriate Automatic Transmission/Transaxle article. If the DTC is not present, concern can not be duplicated or identified at this time. GO to PINPOINT TEST Z for intermittent diagnostics.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All See Note 3 - See Note 4