LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P0A44: Drive Motor A Position Sensor Circuit OVERSPEED

DTC P0A44: Drive Motor A Position Sensor Circuit OVERSPEED

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P0A44 - DRIVE MOTOR A POSITION SENSOR CIRCUIT OVERSPEED

Description:  Indicates the transaxle traction motor exceeded its calibrated maximum RPM limit.
Possible Causes: 
  • Vehicle overspeed condition
  • Damaged transaxle
  • Damaged transaxle control module (TCM)
Diagnostic Aids:  Road test the vehicle. The traction motor should not exceed 8,780 RPM at 109 km/h (68 mph).
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST TP .