LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2606 (Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid)) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P0572: Brake Switch A Circuit Low

DTC P0572: Brake Switch A Circuit Low

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, 2011 Ford Fusion, 2010 Mercury Milan, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
P0572 - BRAKE SWITCH A CIRCUIT LOW

Description:  This DTC indicates the brake switch is stuck in the ON position.
Possible Causes: 
  • Open or short in the brake pedal position (BPP) circuit
  • Open or short in the stoplamp circuits
  • Damaged brake switch
  • Misadjusted brake switch
Diagnostic Aids:  Using the scan tool, check the BPP/BOO PID. The BPP/BOO parameter identification (PID) should toggle on and off with brake pedal activation.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST FD .
scientia non olet · About LEMON Manuals