LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2580 (Bumper System) >> Removal And Installation >> Bumper Isolator - Front >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper cover. For additional information, refer to Bumper Cover - Front .
  2. Remove the 5 rivets and the front bumper isolator.
  3. To install, reverse the removal procedure.
    • Use the special tool to install new rivets.
scientia non olet · About LEMON Manuals