LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2580 (Bumper System) >> Removal And Installation >> Bumper Bracket - Front >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper. For additional information, refer to Bumper - Front .
  2. Remove the 8 front bumper bracket nuts and the front bumper brackets.
    • To install, tighten to 30 Nm (22 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals