LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2575 (Wiper System & Washer System) >> Removal And Installation >> Wiper Mounting Arm and Pivot Shaft >> Removal

Wiper Mounting Arm and Pivot Shaft: Removal

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING & CABLES article.
  2. Remove the cowl panel grilles. For additional information, refer to FRONT END BODY PANELS article.
  3. Remove the nuts, the bolts and position the wiper mounting and pivot shaft assembly aside.
  4. Disconnect the electrical connector and remove the wiper mounting arm and pivot shaft assembly.
scientia non olet · About LEMON Manuals