LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2565 (Supplemental Restraint System) >> Diagnostic Tests >> Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Pinpoint Tests >> Pinpoint Test AE: DTC C1948 - Front Driver's Seat Track Position Switch Circuit Resistance Out of Range >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

The seat track position sensor informs the restraints control module (RCM) of the driver seat position. Refer to Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) .

The RCM monitors the driver seat track position sensor circuits. If the RCM detects a current out of range condition, it will store DTC C1948 in memory and, depending on the fault, flash a LFC 7-7 on the air bag warning indicator.

This pinpoint test is intended to diagnose the following: