LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2562 (Body Panel System - Body Closures) >> Removal And Installation >> Fuel Filler Door Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. For additional information, refer to INTERIOR TRIM & ORNAMENTATION article.
  2. Position the sound insulator aside.
  3. Disconnect the electrical connector and remove the fuel filler door switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals