LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2558 (HVAC - Climate Control System) >> Removal & Installation >> Heating Ventilation Air Conditioning (HVAC) Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL & CONSOLE article.
  2. Remove the 4 HVAC module screws.
    3. Fig 1: Identifying Climate Control Assembly Screws
    GF0018898Courtesy of FORD MOTOR CO.
  3. Disconnect the 2 HVAC module electrical connectors and remove the HVAC module.
    4. Fig 2: Identifying Climate Control Assembly Electrical Connectors
    GF0018899Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals