LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2550 (Engine Mechanical - 4.6L (2V)) >> In-Vehicle Servicing >> Flexplate >> Installation

In-Vehicle Servicing: Flexplate: Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the flexplate and loosely install the 6 bolts. Tighten the bolts in the sequence shown in illustration.
    • Tighten to 80 Nm (59 lb-ft).
    2. Fig 1: Tightening Sequence
    GF0046697Courtesy of FORD MOTOR CO.
  2. Install the transmission. For additional information, refer to INSTALLATION article.
scientia non olet · About LEMON Manuals