LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2550 (Engine Mechanical - 4.6L (2V)) >> In-Vehicle Servicing >> Camshaft >> Removal

In-Vehicle Servicing: Camshaft: Removal

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
    2. NOTE: When the timing chains are removed and the cylinder heads are installed, the crankshaft or camshafts cannot be rotated or piston and valve damage can occur.
  2. Remove the camshaft roller followers. For additional information, refer to Camshaft Roller Follower .
  3. Remove the timing chain. For additional information, refer to Timing Drive Components .
  4. Remove the bolt and the camshaft sprocket and spacer.
  5. Remove the 13 camshaft bearing cap bolts.
  6. Remove the camshaft bearing cap.
  7. Remove the camshaft from the cylinder head.
scientia non olet · About LEMON Manuals