LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2549 (Automatic Transmission - Automatic Transaxle/Transmission - 4R70E/4R75E) >> In-Vehicle Servicing >> Transmission Insulator and Retainer >> Removal

Transmission Insulator and Retainer: Removal

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission support crossmember. For additional information, refer to Transmission Support Crossmember .
  2. Remove the transmission support insulator.
    3. Fig 1: Rear Transmission Insulator Bolts
    GF0013675Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    • Tighten to 90 Nm (66 lb-ft).
    4. Fig 2: Rear Transmission Insulator Bolts
    GF0014077Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals