LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2549 (Automatic Transmission - Automatic Transaxle/Transmission - 4R70E/4R75E) >> In-Vehicle Servicing >> Transmission Filler Tube >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt.
    2. Fig 1: Transmission Filler Tube Bolt
    GF0014042Courtesy of FORD MOTOR CO.
  2. Remove the transmission fluid filler tube.
    3. Fig 2: Transmission Filler Tube
    GF0014043Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    • Tighten to 48 Nm (35 lb-ft).
    4. Fig 3: Transmission Filler Tube Bolt
    GF0014044Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals