LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2549 (Automatic Transmission - Automatic Transaxle/Transmission - 4R70E/4R75E) >> In-Vehicle Servicing >> Overdrive Servo >> Removal

Overdrive Servo: Removal

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the main control valve body. For additional information, refer to Main Control Valve Body .
    2. CAUTION: If the tool is not available, extreme care must be taken. Spring pressure will force overdrive servo piston assembly out of case. Case bore damage may result from trying to pry on overdrive servo internal retaining ring.
  2. Using the special tool, compress the servo spring to remove the overdrive servo retaining ring.
    3. Fig 1: Locating Overdrive Servo Piston Retaining Ring
    GF0003530Courtesy of FORD MOTOR CO.
  3. Remove the overdrive servo piston and return spring.
    4. Fig 2: Removing Overdrive Servo Piston And Return Spring
    GF0003531Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals