Output Shaft and Direct Clutch Cylinder: Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Assembly Pusher | 307-516-3 | |
| Compressor, Clutch Spring | 307-015 (T65L-77515-A) | |
| Protector, Seal | 307-516-2 | |
| Protector Pilot, Seal | 307-516-1 | |
| Protector, Piston Seal | 307-080 (T80L-77234-A) | |
| Protector, Transmission Direct Clutch Outer Fluid Seal | 307-422 | |
| Sizer, Seal | 307-516-4 | |
| Teflon Seal Installer | 307-516 (kit consists of 307-516-1, 307-516-2, 307-516-3 and 307-516-4) |
Material
| Item | Specification |
|---|---|
| MERCON® LV Automatic Transmission Fluid XT-10-QLV |
MERCON® LV |
| Item | Part Number | Description |
|---|---|---|
| 1 | 7F274 | Output shaft to direct clutch cylinder seals (2 required) |
| 2 | 7F240 | Direct clutch outer bearing and race assembly No. 8 |
| 3 | 7060 | Output shaft |
| 4 | 7F273 | Output shaft-to-case seals (3 required) |
| 5 | 87054-S94 | O-ring seal |
| 6 | 7A233 | Output shaft ring gear assembly |
| 7 | 7D164 | Output shaft hub |
| 8 | 97713-S | Retaining snap ring |
| 9 | 7C122 | Snap ring |
| Item | Part Number | Description |
|---|---|---|
| 1 | 7F236 | Direct clutch hub |
| 2 | 7F243 | No. 7 direct clutch bearing |
| 3 | 7D483 | Direct clutch pressure plate retaining ring |
| 4 | 7F237 | Direct clutch inner bearing support |
| 5 | 7B066 | Direct clutch pressure plate |
| 6 | 7B442 | Direct clutch external spline plates (steel) |
| 7 | 7B164 | Direct clutch internal spline plates (friction) |
| 8 | 388104-S2 | Retaining ring |
| 9 | 7F235 | Direct clutch retainer and spring assembly |
| 10 | 7A262 | Direct clutch piston |
| 11 | 7C099 | Direct clutch piston inner seal |
| 12 | 7A548 | Direct clutch piston outer seal |
| 13 | 7F283 | Direct clutch cylinder |