Daytime Running Lamps (DRL)
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
The DRL system is controlled by the LCM. The LCM is located behind the LH instrument panel lower insulator, rearward of the accelerator pedal. The system is designed to turn the high beam headlamps ON at a reduced intensity when the following conditions are met:
- The ignition switch is in the RUN position.
- The headlamps have not been commanded on from any other input.
- The vehicle is not in PARK (P).
The DRL system remains active until the autolamp system turns on the headlamps or the headlamp switch is turned to the HEADLAMPS ON position.