LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2533 (Information Center - Instrumentation, Message Center And Warning Chimes) >> General Procedures >> Compass Zone Adjustment

Compass Zone Adjustment

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refer to the map to select the correct compass zone setting for your geographical location. See Fig 1.
    2. Fig 1: Compass Calibration Zone Map
    G03965509Courtesy of FORD MOTOR CO.
  2. Turn the ignition key to the ON position.
  3. Start the vehicle.
  4. From the SETUP menu, select the compass odometer function.
  5. Press SELECT to show the current zone setting (XX).
  6. Press the SELECT control repeatedly until the correct zone setting for your geographic location is displayed in the message center.
  7. To exit the zone setting mode and to lock in the change, press and release the SETUP control.
scientia non olet · About LEMON Manuals