LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2533 (Information Center - Instrumentation, Message Center And Warning Chimes) >> Diagnostic Tests >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Warning Chimes >> Safety Belt Warning Chime

Safety Belt Warning Chime

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened and the ignition key is turned from the OFF/LOCK or ACC to the ON or START position.

The chime stops sounding when the safety belt is fastened, when the ignition key is turned from the ON or START position to the OFF/LOCK or ACC position, or when the chime has sounded for approximately 6 seconds.

The safety belt warning chime inputs are the: