General Specifications
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Clearance, Tolerance and Adjustments | |
| Backlash between differential ring gear and pinion teeth | 0.203-0.305 mm (0.008-0.012 in) |
| Maximum axle shaft end play | 0.762 mm (0.030 in) |
| Maximum differential case runout | 0.076 mm (0.003 in) |
| Maximum differential ring gear backlash variation between teeth | 0.102 mm (0.004 in) |
| Maximum pinion runout (TIR) | 0.25 mm (0.010 in) |