Exhaust System
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When servicing the exhaust system or removing exhaust components, disconnect all heated oxygen sensors (HO2S) at the wiring connectors to prevent damage to the heated oxygen sensors and wiring harness.
NOTE:
When installing new exhaust hanger brackets, make sure to apply threadlock to the hanger-to-frame fasteners.
NOTE:
The production muffler and tailpipe assembly is a 1-piece design. The service muffler and tailpipe assembly is serviced with 2 pieces. Refer to the Master Parts Catalog for part usage and interchangeability before installing a new exhaust system component.
The exhaust system:
- contains a 1-piece catalytic converter assembly on each side.
- has a dual exhaust system.
- has muffler brackets, with isolators at the muffler and the rear of the tailpipe, bolted to the body.
- has 2 heated oxygen sensors (HO2S).
- has 2 catalyst monitor sensors.
- production muffler and tailpipe assembly is a 1-piece design exhaust system.