Stabilizer Bar Bushings: Removal
WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Remove the stabilizer bar. See STABILIZER BAR . Using the Adapters (T80T-5638-A2, T78P-5638-A1, and T78P-5638-A4), remove the stabilizer bar bushing from the "I" beam axle. See Figure .