LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Front Suspension) >> Removal & Installation >> Ball Joints >> Installation

Ball Joints: Installation

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install upper ball joint first. Install upper ball joint squarely into spindle. Using "C" frame and screw, with suitable receiver cups, install the lower ball joint until firmly seated.
  2. Repeat procedure for lower ball joint installation. Install snap ring. To complete installation, reverse removal procedure. Tighten bolts and nuts to specifications. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals