LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2506 (Exterior Trim & Ornamentation) >> Removal And Installation >> Window Molding - Rear Door

Window Molding - Rear Door

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door glass run. For additional information, refer to DOOR GLASS TOP RUN -- REAR .
  2. Drill out the window molding rivets.
  3. Remove the window molding.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals