LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2504 (Parking Aid System) >> Removal And Installation >> Video Camera >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the license plate housing. For additional information, refer to LICENSE PLATE HOUSING .
  2. Disconnect the electrical connector.
  3. Remove the video camera screw.
  4. Remove the video camera bracket and camera from the license plate lamp housing.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals