LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2504 (Parking Aid System) >> Diagnosis And Testing >> Parking Aid >> Pinpoint Tests >> Pinpoint Test E: DTC B1B58:11 >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The Parking Aid Module (PAM) supplies a reference voltage and signal return to the parking aid sensors. A fault condition occurs when the PAM  detects a short to ground or signal return circuit on the parking aid sensor voltage supply circuit.

This pinpoint test is intended to diagnose the following: