LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine - 4.6L V8 - VIN W & 6) >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Ford Pickup, 2001 Ford Expedition, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine. See ENGINE . Remove exhaust manifold. See EXHAUST MANIFOLD . Remove timing chains. See TIMING CHAINS . Disconnect heater hoses. Remove cylinder head bolts in sequence. See Figure or Figure . Remove cylinder head and gasket.