LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2494 (Manual Transmission - Manual Transaxle/Transmission External Controls) >> Removal And Installation >> Gearshift Lever >> Removal

Gearshift Lever: Removal

WARNING: This page is about a different car, the 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the gearshift lever knob and boot assembly.
  2. Remove the floor console finish panel.
  3. Remove the 2 gearshift cable clips.
    Fig 1: Locating Gearshift Cable Clips
    G06098344Courtesy of FORD MOTOR CO.
  4. Carefully disconnect the gearshift cables from the gearshift lever.
  5. Remove the 4 gearshift lever nuts.
  6. Remove the gearshift lever.
scientia non olet · About LEMON Manuals