LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2490 (HVAC - Climate Control System) >> Removal And Installation >> Thermostatic Expansion Valve >> Material

Thermostatic Expansion Valve: Material

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS

Item Specification
Motorcraft® Electric A/C Compressor Oil
YN-32
-
PAG Refrigerant Compressor Oil (R-134a Systems)
YN-12-D
WSH-M1C231-B
Fig 1: Thermostatic Expansion Valve Replacement Components With Torque Specifications
G06098820Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION CHART

Item Part Number Description
1 W520413 Thermostatic Expansion Valve (TXV) fitting nut
2 19B596 TXV  fitting gasket seal kit (2 pieces required from kit)
3 - TXV  bolt (part of 19849) (2 required)
4 19849 TXV 
5 19E889 O-ring seal
6 19E889 O-ring seal
7 - TXV  fitting stud (part of 19849)