Clutch and Clutch Field Coil - 2.5L, 3.0L (4V): Removal

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Remove the A/C compressor. For additional information, refer to AIR CONDITIONING (A/C) COMPRESSOR - 2.5L or AIR CONDITIONING (A/C) COMPRESSOR - 3.0L (4V) .
Remove the A/C clutch disc and hub bolt.
1. Using a suitable spanner-type wrench, hold the A/C clutch disc and hub.
2. Remove the A/C clutch disc and hub bolt.
  
  Fig 1: Removing A/C Clutch Disc And Hub Bolt
  Courtesy of FORD MOTOR CO.
Remove the A/C clutch disc and hub and the A/C clutch disc and hub spacer(s).
Remove the A/C compressor pulley snap ring.

NOTE: Do not use air tools. Damage to the Air Conditioning (A/C) clutch pulley or A/C compressor may result.

Remove the A/C compressor pulley.
1. Install the A/C Compressor Shaft Protector.
2. Install a suitable 3 jaw puller on the A/C compressor shaft protector and A/C compressor pulley.
3. Remove the A/C compressor pulley.
  
  Fig 2: Removing A/C Compressor Pulley
  Courtesy of FORD MOTOR CO.
Remove the 4 A/C clutch field coil screws.
Remove the A/C clutch field coil.