LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2490 (HVAC - Climate Control System) >> Removal And Installation >> Ambient Air Temperature Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Detach the ambient air temperature sensor electrical connector from the bumper.
  2. Disconnect and remove the ambient air temperature sensor.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals