Leaf Spring Assembly: Removal
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Ford Pickup, 2004 Ford Excursion, 2004 Ford Cab & Chassis, 2003 Ford Pickup, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
DO NOT reuse "U" bolts. Failure to not use a NEW "U" bolt can result in loose or broken springs and suspension components.
Raise and support vehicle. Remove wheel assembly. Position jack stands under axle housing. Remove shock absorber. See SHOCK ABSORBERS . Remove nuts, "U" bolts and spring spacer. Discard "U" bolts. Mark drive shaft to pinion flange for installation reference. Remove bolts, straps and drive shaft from pinion flange. Remove bolt and position leaf spring shackle away from leaf spring. Remove nut and bolt from spring hanger. Using hammer, tap leaf spring free of hanger bracket. Remove leaf spring from vehicle.