LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Front Suspension - 4WD Leaf Spring - Excursion, F250-F550 Super Duty) >> Removal & Installation >> Leaf Spring Assembly >> Installation

Leaf Spring Assembly: Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2004 Ford Pickup, 2004 Ford Excursion, 2004 Ford Cab & Chassis, 2003 Ford Pickup, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install leaf spring into hanger. Tighten bolt and nut finger tight. Install spring into shackle. Tighten bolt and nut finger tight. Install NEW left "U" bolt through front spring cap. Install NEW right "U" bolt through axle assembly bracket. Install spring spacer and nuts. Tighten nuts finger tight.
  2. Lower vehicle onto jack stands until front suspension is supporting weight of vehicle. Tighten "U" joint bolts in a criss-cross sequence. Tighten rear then front leaf spring retaining bolt. To complete installation, reverse removal procedure. Tighten remaining bolts and nuts. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals