Removal & Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Ford Pickup, 2004 Ford Excursion, 2003 Ford Pickup, 2003 Ford Excursion, and 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Remove bolts and stabilizer bar retainer brackets. Disconnect stabilizer bar from link assembly. Remove stabilizer bar. Remove link assembly from axle brackets. To install, loosely install stabilizer bar assembly. Ensure stabilizer bar is centered on front axle and insulators are properly positioned. Attach links to brackets and stabilizer bar. See Fig 1. Tighten nuts and bolts to specification. See TORQUE SPECIFICATIONS .