Differential - Front Wheel Drive (FWD): Assembly

WARNING: This page is about a different car, the 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Using a suitable press, install a new differential side bearing. Only use the inner bearing race to install.

Fig 1: Installing Differential Case Bearing Using Suitable Press
Courtesy of FORD MOTOR CO.
Install the VSS drive gear.
Install the spacer.
Using a suitable press, install a new differential side bearing. Only use the inner bearing race to install.

Fig 2: Locating Differential Side Bearing
Courtesy of FORD MOTOR CO.
Install the final drive gear and the 10 bolts.
- Tighten in the sequence shown in illustration to 120 Nm (89 lb-ft).
  
  Fig 3: Identifying Final Drive Gear Bolts Tightening Sequence
  Courtesy of FORD MOTOR CO.