LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2471 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Lock Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front interior door handle. For additional information, refer to INTERIOR DOOR HANDLE - FRONT .
  2. Release the tabs and remove the door lock control switch.
    Fig 1: Locating Door Lock Control Switch
    G06099900Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals