LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2470 (Information System And Entertainment System) >> Removal And Installation >> Antenna Cable - AM/FM >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Audio Control Module (ACM). For additional information, refer to AUDIO CONTROL MODULE (ACM) .
  2. Disconnect the AM/FM antenna cable from the AM/FM antenna.
    3. NOTE: Lower the glove compartment completely to access the pin-type retainers.
  3. Release the AM/FM antenna cable pin-type retainers.
  4. Remove the AM/FM antenna cable.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals