LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2469 (Engine Controls - Electronic Engine Controls - 3.0L (4V)) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Material

Camshaft Position (CMP) Sensor: Material

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION CHART

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft SAE 5W-20
Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent
WSSM2C930-A
Fig 1: Camshaft Position (CMP) Sensor Replacement Components With Torque Specifications
G06096769Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION CHART

Item Part Number Description
1 14A464 Camshaft Position (CMP) sensor electrical connector (part of 12C508) - LH
2 W500214 CMP  sensor bolt - LH
3 12K073 CMP  sensor - LH
4 - CMP  sensor O-ring seal - LH
5 14A464 CMP  sensor electrical connector (part of 12C508) - RH
6 W500214 CMP  sensor bolt - RH
7 12K073 CMP  sensor - RH
8 - CMP  sensor O-ring seal - RH