Normal Operation
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The RCM briefly activates the Passenger Air Bag Deactivation (PAD) indicator to prove-out and verify to the occupants correct functional operation of the PAD indicator.
The RCM monitors the PAD indicator circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Faulted PAD indicator
If a fault is detected, the RCM will store DTC B00D5:11, B00D5:12 or B00D5:13 in memory and send a message to the Instrument Cluster (IC) module to illuminate the air bag warning indicator.
- DTC B00D5:11 (Restraint System Passenger Disable Indicator: Circuit Short to Ground) - When the RCM senses a short to ground on the PAD indicator circuit, a fault will be indicated.
- DTC B00D5:12 (Restraint System Passenger Disable Indicator: Circuit Short to Battery) - When the RCM senses a short to voltage on the PAD indicator circuit, a fault will be indicated.
- DTC B00D5:13 (Restraint System Passenger Disable Indicator: Circuit Open) - When the RCM senses an open circuit on the PAD indicator, a fault will be indicated. An open ignition circuit to the PAD indicator can set this DTC.
This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- PAD indicator
- RCM