LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2452 (Seat System - Seats) >> Removal And Installation >> Seat Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For component identification and locations, refer to SEAT - EXPLODED VIEW, FRONT .
  1. Remove the recliner handle cover.
  2. Remove the seat control switch knob.
  3. Remove the outboard side shield.
    • Remove the 3 screws and detach the side shield.
    • Disconnect the seat control switch electrical connector.
  4. Remove the knob and seat control switch.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals