LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2450 (Anti-Lock Brake System - Vehicle Dynamic Systems) >> Removal And Installation >> Wheel Speed Sensor Ring - Front >> Removal

Wheel Speed Sensor Ring - Front: Removal

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS .
  2. Using a suitable driver, remove the ABS wheel speed sensor ring.
scientia non olet · About LEMON Manuals