LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2448 (Hydraulic Brake System Actuation) >> Removal And Installation >> Brake Fluid Reservoir >> Material

Brake Fluid Reservoir: Material

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSSM6C65-A1
Fig 1: Identifying Brake Fluid Reservoir Components
G06094479Courtesy of FORD MOTOR CO.
PART DESCRIPTION CHART

Item Part Number Description
1 2K478 Brake fluid reservoir
2 - Brake fluid level warning switch electrical connector
3 2B467 Seals (2 required)